Dyzard Posted June 29 Share Posted June 29 When I measure for an attack, the rules state I use the range tool and my target must be within, does this mean as long as the flat part of one edge of the tool is against my base and any part of the tool touches my target base would they be considered within, specifically speaking flat against my base and just the edge of the corner touches opponents base Link to comment Share on other sites More sharing options...
Thoras Posted July 17 Share Posted July 17 The distance a ranged tool measures is the length of the tool, not the total area of the tool. This means that the tools length is used, not any point of the tool to any other point of the tool. So the center of the tool to the corner of the tool as it sounds like your describing would not be a valid measurement. To use the tool properly, you effectively need to be measuring with the center of the tool to the center of the tool or same edge to same edge. Link to comment Share on other sites More sharing options...
Recommended Posts